Description:
With an EQ heritage that has produced countless industry-standard patents and dates back more than 30 years, the dbx iEQ-31 easily lives up to the dbx legacy of uncompromised sonic integrity. In addition to unsurpassed equalization specs, the iEQ-31 also offers the built-in necessities which include AFS feedback Suppression, Type V noise reduction and PeakStopPlus limiting. Besides including two 31-band channels of 1/3-octave equalization, the iEQ-31 also offers +12 dB input gain range; switchable +6 or +15 dB boost/cut range, 40mm faders, XLR, 1/4'' and Euroblock inputs and outputs, nonconductive nylon sliders; and an intuitive user interface with comprehensive output and gain reduction metering. As always, the inevitable result of our meticulous attention to detail and top-quality componentry is exceptional sound, performance, and reliability.
The iEQ series represents a major step forward in the performance of graphic equalizers. The iEQ series is now able to offer state-of-the-art digital EQ performance and specs with an analog look and feel. From its amazing 10Hz to 22kHz frequency response, to its 113dB dynamic range and Advanced Feedback Suppression (AFS™), dbx proprietary Type V™ noise reduction and PeakStopPlus® limiting, the iEQ-31 offers out of this world specifications with a down-to-earth price point. Sure to find a home in the studio, on tour and with installed sound venues, the iEQ-31 is destined to take its rightful place in the lineage of great dbx® signal processors that are the professional’s choice in signal processing. With such pristine design and quality, the iEQ-31 offers the maximum sonic flexibility in a straight forward interface and rock-solid construction.
Features:
|
• Advanced Feedback Suppression (AFS™)
• Type V™ Noise Reduction
• PeakStopPlus™ Limiting
• 1/3-octave Constant Q frequency bands
• Switchable boost/cut ranges of ±6 or ±15dB
• 18 dB per octave 40Hz low-cut filter
• ±12dB input gain range
• XLR, TRS and Euroblock Inputs and Outputs
• Internal Toroidal Transformer
• Dyanmic range of greater than 113dB
• User Power Up Features
• Relay Bypass for Power Failure System Protection
|
INPUT |
|
Connectors: |
1/4" TRS, female XLR (pin 2 hot), and
Euroblock |
|
Type: |
Electronically balanced/unbalanced, RF
filtered |
|
Impedance: |
Balanced 40k ohm, unbalanced 20k ohm |
|
Max Input Level: |
>+22dBu balanced or unbalanced |
|
CMRR: |
>40dB, typically >55dB at 1kHz |
|
OUTPUTS |
|
Connectors: |
1/4" TRS, male XLR (pin 2 hot), and Euroblock |
|
Type: |
Balanaced/unbalanced, RF filtered |
|
Impedance: |
Balanced >120 ohm, unbalanced >60 ohm |
|
Max Output Level: |
>+20dBu balanced/unbalanced into 2k ohm or
greater
|
|
SYSTEM PERFORMANCE |
|
Frequency Response: |
20Hz to 20kHz, +0.5/-0.25dB |
|
Dynamic Range: |
>113dB, "A" weighted |
|
THD+Noise: |
<0.003%, typical at +4dBu, 1kHz |
|
Interchannel Crosstalk: |
<-80dB, 20Hz to 20kHz |
|
Noise Reduction: |
Up to 10dB of dynamic broadband noise
reduction |
|
Digital Resolution: |
24 bits |
|
Sample Frequency: |
48khz |
|
Latency: |
2msec |
|
POWER SUPPLY |
|
Operating Voltage: |
120VAC 60Hz, 220-240VAC 50/60Hz |
|
Power consumption: |
17W |
|
Main Connection: |
IEC receptacle |
|
Dimensions: |
5.25" H x 19" W x 7.9" D |
|
Note: Specifications subject to change without
notice. |
|
|
|
|
|
|
|
| |
|
|
|
|
|
