Description:
Friedrich PTACs are known for being feature-rich and backed by an AC-focused manufacturer. Our new models build on these strengths, with advanced engineering that delivers impressively quiet performance with expanded comfort settings.
Features:
Quiet, Easy to Field Modify, Powerful
- Friedrich PTACs are known for being feature-rich and backed by an
AC-focused manufacturer. Our new models build on these strengths, with
advanced engineering that delivers impressively quiet performance with
expanded comfort settings.
- Here are just some of the enhanced features:
- Reduced sound levels: The two-motor design one motor inside, one outside
allows the indoor motor to run at slower speeds, which sharply reduces
indoor sound levels. Plus, the motors are permanently lubricated for quieter
operation and increased durability.
- More comfort choices, quieter operation: Our 3-speed fan (cooling and
heating modes) has nearly five times the surface area of a typical PTAC fan,
allowing for more uniform airflow over a wider path. The result is faster,
more even air distribution and quieter airflow. Guests/residents will
appreciate having more comfort options. Plus, the soft start/stop fan delay
reduces transitional noise usually associated with compressor start-up.
- Increased energy savings: Models have EERs up to 12.0 and COPs up to
3.4. Separate thermostat limits for cooling and heating provide greater
control over temperature ranges. Of course, centralized desk control and
compatibility with energy management systems can boost efficiency and lower
operational costs.
- A universal heater/power cord simplifies installation, ordering:
Installers can change the heat output simply by changing the standard power
cord to the desired size. The optional cords connect as easily as a phone
jack. Distributors can stock fewer PTAC models and optional power cords
instead of numerous PTAC models. (Note: All wiring and building connections
must be properly sized to accommodate the power cord. See model
specifications for details.
- Plus, all capacities can fit standard 42-inch sleeves without the added
expense of a baffle kit*.
* Sleeves are sold and shipped separately to accommodate new construction and
replacement requirements.
Comfort & Dehumidification
- Even heat monitoring checks room temperature and automatically adds a
heat boost if necessary
- Separate thermostat settings (limiting) for cooling and heating nodes
- Samples the room temperature every 9 minutes to monitor and maintain
desired temperature
- “Instant Heat" in heat pump mode quickly heats a room to the desired
temperature
- Dehumidification mode removes up to 3.2 pts per hour
- Optional constant fan mode for additional comfort options
- Reversible indoor air louvers for an additional airflow direction option
- Emergency heat will engage (in heating mode) in the event of a power
failure
Sound Reduction Technology
- New 2-motor design allows the indoor motor to run at slower speeds,
which reduces indoor sound levels
- The quiet, efficient compressor is mounted on vibration isolators, which
absorb vibration-causing noise
- Permanently lubricated dual motors reduce noise
- New elongated fan moves air over a wider area so it's quieter
- Fan turns on before the compressor starts to muffle the sound
- High-density insulation helps keep outdoor noise outside
Durability
- Diamonblue Technology advanced anti-corrosion protection protects the
outdoor coil against deterioration and extends unit life, especially in
harsh coastal environments
- Faultless surehold Front cover system attaches securely
- Room Freeze Protection initiates heat if room temperature falls to 40 °F
in an unoccupied room
- Random compressor resistant protects
electrical systems
- Stainless Steel endplates on both indoor and outdoor coil
- Indoor coil frost sensor protects the compressor
- Durable front panel with break-proof control door and design
- Permanently lubricated fan motors
- Durable, powder coat paint finish
Health and IAQ
- Two washable, antimicrobial filters
Energy Usage: Management
- Increase or decrease electric heat output by changing the power cord
- Set separate heat and cool range limits
- Energy Management System Compatible
- Electronic defrost control
Maintenance and Installation Features
- Service error code storage
- May be installed flush with floor
- Reversible indoor air louvers
- Nationwide Service Network
- Modular design and pop out wiring modules
Accessories
Features
- Environmentally friendly R-410A refrigerant used in all models
- Over 40 premium standard features is like getting a free upgrade
- Fits other PTAC sleeves without a baffle kit for easy replacement of
other units
- Diamonblue Technology is advanced corrosion protection that protects the
outdoor coil against deterioration and extends the life of the unit,
especially in harsh coastal environments
- Energy Control features like separate heat and cool range limits
- Guest-pleasing features like optional remote control operation, remote
thermostat operation, constant comfort room monitoring, quiet start/stop
delay to reduce transitional noise, an ultraquiet air system with a
low/sleep setting that is noticeably quieter than other brands, and air
quality enhancing antimicrobial filters
- Easy servicability features that engineering and maintenance staffs will
appreciate including single motor design, service error code storage,
top-mounted air filters, and emergency heat override protection
- Designed for longer product life with tamper-resistant grille, enclosed
clamshell motor and dual thumbscrews, corrosion-resistant aluminum
endplates, indoor coil frost sensor to protect compressor and much more
Dimensions & Capacity
Specifications
- Cooling Capacity (Btu/hr): 7700/7600
- Heating Capacity (Btu/hr): n/a
Unit Dimensions
Additional Measurement Information
- Front Cover Depth: 7 3/4"
- Dimensions With Package: 19.75x23x43.5
Detailed Electrical Information
- Fan Motor Horsepower: 0.024
- Max . Total Draw/Fuse Breaker: 6.1
- Plug Face (NEMA #): 6-20P
- Air Circulation: 265 cubic feet per minute
- Est. Yearly Operating Costs: $54
- Indoor CFM, High: 345/315
- Moisture Removal: 1.7 pints/24 hours
- R-410A Charge (oz): 23.63
- Sensible Heat Ratio: 0.84
