Description:
The T0D412 12" 4-ohm Dual Voice Coil subwoofer mimics the performance and design from its older Power Series brothers. The T0 subwoofers feature VAST technology that increases surface cone area up to 25% so it performs like a much larger woofer. The FlexFit basket not only looks the part but it provides extreme flexibility for extreme installations. Clean, high tech, and high power handling characteristics let this subwoofer wear the torture-tested "Power Series" badge!
Features:
The T0D412 12" 4-ohm Dual Voice Coil subwoofer mimics the performance and design from its older Power Series brothers. The T0 subwoofers feature VAST technology that increases surface cone area up to 25% so it performs like a much larger woofer. The FlexFit basket not only looks the part but it provides extreme flexibility for extreme installations. Clean, high tech, and high power handling characteristics let this subwoofer wear the torture-tested "Power Series" badge!
Anodized aluminum heat sinking dust cap
Anodized aluminum voice coil former
High-temp voice coil with spun-laced Nomex® re-inforcement collar
Kevlar fiber reinforced paper cone
Optimized and matched magnetic and complicance geometry
Optimized pole piece and spider venting
Periodic-stitched fatigue resistant tinsel lead wire
Proprietary 8 AWG insulated allmetal input spring terminal connection
Rigid die-cast aluminum basket
Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100 Degrees at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.
CEA-2031 Compliant
Size 12"
Nominal Impedance Dual 4-Ohm
Power Handling 700 Watts RMS
1400 Watts MAX
Voice Coil Diameter 3" (75.5 mm)
Magnet Weight
Speaker Connector Compression Terminal
Fs (Hz) 26
Re (Ohms)
Le (mH)
Qms
Qes
Qts 0.53
Vas (Liters) 55.1
Sd (cm2)
SPL (dB @ 1w/1m) 84.1
Xmax (mm) 14.8
Woofer Displacement 0.308 cu. ft.
(8.73 Liters)
Cutout Diameter 11.25 in.
(285 mm)
Mounting Depth 6.875 in.
(17.46 mm)
Shipping Weight 31.16 Lbs.
(14.13 kg)
