Description:
Nissin's Di 622 Mark II flash system for Sony features a quality improved hot shoe, SD and SF slave mode, built-in wide angle diffuser and catch light reflector, and much more!
Features:
- The DI622 Mark II new flash maintains all of the features of the DI622 with
these new features added
- Wireless TTL Remote Mode (this works with Channel 1, Group A controlled by a
Master Flash)
- EV Compensation +/- 1.5 EV in .5 EV increments.
- My TTL Setting: +/- .75 EV in .25 EV increments
- SD and SF Slave mode (SD: Digital Pre-Flash; SF: Single Flash System)
- New Sync Contact: PC and 1/8 plug.
- The quality of the hot shoe has been improved.
- With built-in wide angle diffuser and catch light reflector
Specifications
| Guide Number: |
44/145 at 105mm focal length (ISO 100 m/ft) |
| Illumination Coverage: |
24-105 mm (16mm with diffuser panel) Automatically adjusts to lens
focal length |
| Power Source: |
4 x AA size batteries (Size AA Ni-MH or lithium batteries useable) |
| Battery Life: |
200-1500 flashes according to the mode (with alkaline batteries) |
| Energy Saving: |
Switch to Stand-by mode in 2 minutes and power off in 30 minutes
after the power has been turned on or after the last flash |
| Recycle Time: |
5 seconds with fresh alkaline batteries |
| Flash Exposure: |
My TTL Setting: +/- .75 EV in .25 EV increments |
| AF Assist Light: |
Effective range of approximately 0.7 to 6 m / 2.3 to 20 ft. |
| Color Temperature: |
5600K |
| Flash Duration: |
1/8000 second (full power flash)
1/800 - 1/20,000 second (controlled flash) |
| Wireless Flash: |
Wireless remote: Channel 1 Group A (Controlled by Master Flash)
SD: Digital Pre-Flash Slave / SF: Single Flash Slave
(6 power level settings in slave modes) |
| Dimensions: |
77 x 130 x 103mm / 3.0 x 5.12 x 4.05 inches |
| Weight: |
315 g / 11 oz. without batteries |