Description:
The new NT2-A carries on the tradition forged by the now legendary Rode NT2. A professional large capsule (1”) studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.
At the heart of the NT2-A is the Australian designed and manufactured HF1 dual diaphragm capsule. The frequency and transient response of this new transducer has been voiced to complement today’s modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50’s and 60’s. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.
Features:
Features:
- The Australian designed and manufactured HF1
1inch edge terminated, gold sputtered, dual 5 um diaphragm capsule.
- 3-position variable polar pattern: Omni,
Cardioid and Figure 8; all controlled on the mic
- 3-position variable high-pass filter: Flat,
80 Hz or 40 Hz
- 3-position variable pad: 0 dB, -5 dB or -10
dB
- Ultra low noise, transformerless SMT
circuitry
- Wide dynamic range
- High strength heat-treated steel mesh head
- Durable satin nickel finish
- Internal capsule shock mounting
- Supplied complete with soft pouch and clip
- Designed and manufactured in Sydney,
Australia
Specifications:
- Acoustic principle: Externally polarized 25
mm (1 inch) dual diaphragm
- Directional pattern: Multi-pattern - 3
position variable pattern Omni, Cardioid and Figure 8, controlled at the
microphone
- Frequency range: 20 Hz - 20 000 Hz
- Output impedance: 200 Ohm
- Signal/Noise ratio DIN/IEC 651: 87 dB (1 kHz
rel 1 Pa; per IEC651, IEC268-15)
- Equivalent noise: 7 dBA SPL (per IEC651,
IEC268-15)
- Maximum SPL: 147 dB (@ 1% THD into 1 kOhm)
157 dB (@ 1% THD into 1 kOhm) - pad at maximum
- Sensitivity at 1 khz into 1 kOhm: -36 dB re
1 Volt/Pascal (16 mV @ 94 dB SPL) +/-2 dB
- Maximum output voltage: +16 dBu (@ 1% THD
into 1 kOhm)
- Dynamic range - DIN/IEC 651 140 dB (per
IEC651, IEC268-15)
- Power (Supply voltage): 48 Volts (P48)
- Output Connection: 3 pin XLR, balanced
output between pin 2(+) and pin 3(-); pin 1 ground
- Weight approx.: 860 grm (30.36 oz)
