Product Accessories
Free Shipping!
Price: $249.00
Free Shipping!
Price: $149.99
Free Shipping!
Price: $199.00
Free Shipping!
Price: $399.00
Free Shipping!
Price: $299.99
Free Shipping!
Price: $359.99
Free Shipping!
Price: $199.99
Free Shipping!
Price: $59.00
Free Shipping!
Price: $249.00
The latest SANYO optical engine, called QuaDrive, adds a Color Control Device to conventional 3LCD (red/green/blue) systems. The first projector to launch this innovative new QuaDrive engine is the PLC-XP200L. The additional Color Control Device in the QuaDrive optical engine allows the PLC-XP200L to automatically control the amount of yellow light in the image, producing higher luminosity with improved color accuracy and clarity.
The demand for even brighter projectors continues to come from the field as systems integrators are asked to install video displays in extremely large venues such as convention halls, conference rooms, auditoriums and houses of worship. However, as brightness levels increase on 3LCD projectors, there is a reverse effect in color reproduction. Colors become noticeably washed out, lacking vibrancy and realism.
SANYO's innovative solution overcomes the limitations of 3LCD technology, opening the way for new projectors capable of extremely high luminosity without the trade off in color accuracy. The PLC-XP200L, the first projector to benefit from this new technology, is rated at an amazing 7000 lumens. Coupled with the impressive high contrast ratio of 2200:1, the PLC-XP200L is capable of generating clearer, richer and more beautiful images than was ever possible with high brightness 3LCD projectors.
SANYO developed a new high-speed image compensating LSI for the QuaDrive engine. The combination of this engine and the new LSI allows for up to 20% more color space than our conventional projectors. With the controlled yellow light, SANYO’s Advanced Color Correction technology separates each color histogram for unparalleled color processing and correction, resulting in beautiful and naturally rich colors.
Additionally, the PLC-XP200L is equipped with a high-output, single lamp that is designed for exceptional light efficiency. Aside from generating sharper and brighter displays in large halls and meeting rooms, the 4LCD design is well suited for digital signage and advertising in brightly lit environments.
Minimal maintenance and repair was essential for the XP200L, so it was outfitted with SANYO’s exclusive Active Maintenance Filter (AMF). AMF is a single filter cartridge that contains ten lengths of filtering material plus an airflow sensor to detect when airflow is obstructed by dust. The AMF system automatically advances a clean section of filter when needed. When the last section of filter material becomes obstructed an on-screen graphic appears telling the user to change the cartridge. Each filter lasts approximately 10,000 hours with a cartridge lifecycle of about 2 years (calculation based on 14 hrs/day projector use). The filters are easy to replace due to the side loading access on the projector. To further increase reliability and performance, the PLC-XP200L uses SANYO's unique Durable Inorganic Optical System (DIOS).
The SANYO PJ-NET ORGANIZER is available, allowing the PLC-XP200L to be connected to a wired network via Ethernet. Using the PJ-NET MASTER software all projector functions such as power status, lamp status, input mode, signal condition, lamp-use time, etc. can be monitored and controlled from a remote location.
For quick and easy installation the XP200L is outfitted with a motor driven vertical and horizontal lens shift. Up/Down/Left/Right lens shift ensures image projection at any angle of up to 360-degrees, allowing ceiling or floor image projection.
A special mechanical shutter is also placed behind the lens and activated by the remote control, allowing the presenter to close the lens and temporarily darken the screen.
Specifications:
Brightness
7000 Lumens
Resolution
XGA (1024 x 768)
Uniformity 90%
Panel
System 1.3” TFT Poly x 3 / Color Control x 1
Number of Pixels
2,359,296 (786,432 x 3)
Contrast Ratio
(Full on / off) 2200:1
Image Size
Dependent on Lens
Aspect Ratio
4:3
Projection Lamp (s)
330W NSHA
Scanning Frequency
H 15 - 100kHz / V 48 - 100Hz
Dot Clock
180MHz
dB Rating
35.0(eco1 mode)
Voltage 100 -
240 V
BTU Rating
1703
Power
Consumption 499W
Weight 25.1
lbs.
Dimensions (inch)
14.6 x 7.4 x 17.3
Projection Lens (inch)
Lens Sold Separately
Throw Distance (feet)
Dependent on Lens
Zoom / Focus
Dependent on Lens
Throw Ratio
Dependent on Lens
Zoom Ratio
Dependent on Lens
Up / Down Ratio
10:0 - 1:1 (Lt / Rt 3:2 - 2:3): / dependent on lens
Power Lens Shift
Up / Down / Left / Right
Optional Lenses
Yes
Rear Screen Projection (L / R Reverse)
Yes
Ceiling Mountable (T / B Reverse)
Yes
Digital Keystone Correction
V +/- 40°, H +/- 20°
Digital Zoom
49x - 1/4x
Digital Interface (HDCP Compatible)
DVI-D
Analog Interface
5BNC, D-sub 15 pin 3RCA, S-video
USB Port Yes
RS-232 Control Carry and / or
Yes
Speaker Output
No
Audio Output
Stereo Mini x 2 (Switchable)
PC Monitor Output
Yes
PC-Less Presentation
No
Wireless Presentation
No
Network Control / Admin
Optional
Custom Startup Screen
Yes
Detachable Input Panels
No
Shipping Case
No
Remote Control
Wired / IR with Mouse Control
Get your questions answered by the community!
